REPLACE your older transmitter circuit boards with the new R3DAlert.  Why pay higher prices for a transmitter replacement when the R3DAlert will do all the ALERT functions needed for your rain and level data sites.

1.  Use your existing transmitter canister, battery, radio, cables and standpipe.

2.  Replace your transmitter board with the newer R3DAlert.  Mounts using a din rail.

3.  Connect your inputs to the R3DAlert terminal blocks.  

4.  Press the transmitter button, key 1 to verify everything is working.

R3DM.Alert   ~  $462  with ALERT program installed and ready to use.
Purchase the new, small, low power R3DALERT transmitter as a replacement for your older  telemetry instruments.  

• SMALL SIZE:  Using the latest technology available, the small (3.5" X 4.5" X 1.25") unit is packaged in 16 gage steel powder-coated case that can easily be installed into an existing round canister.

• LOW POWER:  The RUG3 is low power (< 3 ma) when running full time with the display and modem on.

• GOOD RESOLUTION:  6 AI (12bit), 8 DI, 4 Relays out.  

• LOCAL CONTROL:  The RUG3 can be setup to latch a relay, open a gate, turn a pump on based on local or remote measurements.  

• ONSITE DISPLAY:  The Display is sunlight readable with or without the LED backlight. The display/keypad make it possible for you to set up the unit without a field computer, observe sensor values, and enter set points on site.  Set point entry can be password protected.  

• ENGINEERING UNITS:  All calculations are performed in engineering units using floating point math so no operator interpretation of raw data is necessary.  

• PROGRAMMING:  R3Setup is free; sample ALERT transmitter programs are free for your use..  

• CABLES:  R3CBLAUDIO Radio Connection Cable $15 and R3CLB232 RS232 Program Cable $20

EVENTS for small telemetry systems.  $995

WINDOWS OS:  Uses the latest windows operating system.

EASY TO USE & SETUP:  Built in tools to help you design your own displays.

ALARMS:  Annunciators, Multiple Images, Multiple Color Bar Charts, Real Time Trends

Events 64/64 has all the functionality as the full version without networking and with 64 inputs and 64 outputs.   Inputs and outputs are either Modbus or ALERT formatted messages.  You can have as many defined sensors as necessary.  The 64/64 version is lower in price and can be upgraded to the full version.

Features     See Events Help